As the velocimeter is being widely used in both steelmaking and non-ferrous industry, a variety of industry need non-contact velocimeter not affecting product quality and protecting itself from wear.
Palmatech has developed the first laser doppler velocimeter in Korea through combination of technology of laser application, signal processing and DSP technology accumulated for 10 years, which comprises sensor head with optical parts, signal processor for frequency analysis of scattering light and optic fiber connecting the former two.
- Laser Doppler Effect
- Optical Sensor Head
- Optical Fiber Cable
- Signal Processor
- Non-contact velocity measurement
- Applying DSP algorithm
- Small sensor head
Make sure of orign technology Korea patent application(commercialization under way)
Korea patent application 2001-72794
Korea patent application 2000-80015
Patent application No. 1999-61377, 61386
POSCO(Gwangyang) No.2CRM 2PL
- Measuring velocity and length of rolled steel sheet in steelmaking industry
- Measuring velocity and length for industrial use
Steel sheets and wires (steel plates, cold mill, slab, paper, billet, etc.)
Tubes (pipe, wire, fiber, etc.)
- Verifying the velocity of a vehicle
- Measuring frequency shift in audio equipment
System Performance | Measurement Range | 0mpm to 4500mpm, 0 to 1000km |
Unit of Measurement | mpm(meter per minute) or m⁄s(meter per second) | |
Update Time | <100ms(A⁄O), 300ms(RS232) | |
Reproducibility | <±0.2% | |
Accuracy | <±0.2% | |
Standoff Distance | 500mm, 1,000mm, 1,500mm | |
Depth of Field | ±100mm(at 1,000mm standoff distance) | |
Utility | Pure Air | 5kg⁄§², Dry, Class 3, 25A pipe lines |
Water | Non used ⁄ Used(customer request) | |
Environment | Ambient Temperature | 0¡É to 40¡É |
Relative Humidity | Non-condensing environment for sensors | |
Signal Ground | Maximum 10¥Ø | |
Frame Ground | Maximum 100¥Ø | |
Power | 220VAC, 60Hz, 1Phase |
Analog Output(standard) | 4 to 20mA, DC 0V to 10V output proportional speed |
RS232(standard) | Speed, Length, Signal quality |
Digital Input(standard) | Material present, Reset |
Type | Heavy duty aluminum extrusion |
Laser Source | Solid state diode Laser |
Laser Safety Class | Class ¥²(b) |
Laser Visible | Non visible(NIR) |
Feature | Nitrogen(N©ü) Gas, Pure air(beam path purge) |
Relative Humidity | Non-condensing environment |
Ambient Temperature Range | 5¡É to 40¡É |
Power | 220VAC, 60Hz, 1Phase |
Sensor Cable(Optical Fiber) | 120m (standard) |
Front Display | Speed(5 digits with floating decimal point), Length(7 digits) |
Peripheral Interface | D⁄I, D⁄O, A⁄I, A⁄O, RS232 and TCP⁄IP(upon customer request) |
Ambient Temperature Range | -5¡É to 45¡É |
Relative Humidity | Maximum 80%RH |
Power | 220VAC. 60Hz, 1Phase |